PRO3S+ V5.0 Scanner, 2025 Upgrade All-in-One Scan Tool

✔️12X Faster ✔️Smarter✔️Wider Regional vehicle coverage ✔️More Popular ✔️ALL-IN ONE✔️NO IP Limit ! (Much Stronger than LAUNCH X431 Pro3 ACE

LAUNCH X431 Pro3s+ V5.0,2025 Newest Version,Expert Functions AllL--In-One,From Beginner To Master(5 Years Back Up,2 Years F.ree Update)

1.Support Topology Mapping: Intuitive color-coded topology display of all structures between all vehicle modules for easy troubleshooting, while PROS V 5.0 does not support;

2.Support 24V Heavy-Duty Trucks Diagnoses: Compatible with X431 Smartlink 2.0 HDIII module for diagnosing light, medium and heavy duty vehicles, while PROS V 5.0 not;

3.Support Full Active Test/Bidirectional Control:This auto diagnostic tool features full-featured bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. lacate the fault and detect the fault in seconds.

4. Full Systems Diagnoses: PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, F-uel Pump, Gear, and more…; Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management and more ;BCM (Body System):SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance and more; Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System and etc.

5. 55+ Service Functions: Cover almost all available Reset Functions on Vehicle. ( car-specific)(Functions keeps growing!!!)

6.Advanced ECU Coding, More Coding Options: Eprogram adaptive data for ECUs after making repairs or replacements; change software to customize a vehicle in a smarter way; deactivate unneeded functions: deactivating the auto start-stop / changing the chimes / deactivating buzz sounds and etc.

7.Wire less & intelligent Diagnosis + OE-level All Systems Diagnostics: Conducting wire less diagnostics through blue tooth adapter so as to set you from entangled wires.you can easily get the VIN information of the car, and do a full scan for your car&get a disgnostic health report.launch X431 PRO TT 5.0 scan tool is designed to troubleshoot all systems,Retrieve the tested ECU information/Read & erase Diagnostic Trouble Codes,and pinpoint the trouble area.View the Live Data5

8.New Upgraded DBScar VII Dongle: Equipped with indicator lights, which is more intuitive and user-friendly; b. Makes the diagnostic and matching process up to 20 times faster and more stable, transmitting diagnostic information at speeds of up to 64 Mbps (maximum), and also achieves Bluetooth + USB dual connection. c. Supports CAN FD protocol that is compatible with more latest vehicles, for example: Fit for 2020-2025 GM Onix, Tracker,Fit for 2021-2025 GM Suburban,Fit for Escalade,Fit for Escalade ESV,Fit for 2025 GM Silverado,Fit for 2021-2025 Chrysler Grand Cherokee(WL),Fit for Grand Wagoneer, etc.More Than 200+ Brands and 20000+ Cars supported + 25 Languages + 2 Fr.ee Years Update+5 Years backup+Global Version,No IP Limit

9. AutoAuth for FCA, SGW: Compatible with 2017 and later Fit for Chrysler /Fit for Dodge /Fit for Alfa Romeo /Fit for Jeep /Fit for Fiat vehicles.

10. V.A.G Guided Functions: It can perform complex functions such as special functions, ECU coding, etc., to help your diagnostic step by step with instructions for VW/for Audi/for Skoda, etc.

11.Full OBDI&OBDII Connectors and cables ,cover all vehicles in the world:LAUNCH X431 PRO 5.0 TT supports full OBD1 and OBD2 protocol which be shipped as complete package with necessary connectors and accessories. Some vehicle-specific OBD1 adapters are included.

12.Online Maintenance Resources: Operating skills, DTC Help, Automotive Technology handbook, Repair Case and How-to Videos.

13.Auto VIN Scan + One Click Update + Diagnostic Report & History + Diagnostic Feedback+Online Feedback+Online Help+Electric Circuit Diagram cases+ Operation Tips + DTC Help and Repair Tips + Automotive Technology Handbook + Repair Case + How-To Videos.

>>>>Advanced Configure: (1)Android 10.0 Systems,(2)8'' High-resolution LCD Touchscreen,(3)4*64GB larger Storage Capacity(128GB can be extended）,(4) 6300mAh Battery Capacity lasts 15+h work,OBD1&OBD2 diagnosis, (5)Quad-Core 2GHz CPU Processor,(5)2.4GHz&5GHz Dual-Frequency Wi-Fi,the transmission rate is 8Xfaster than old version,(6)8XFAST AUTO VIN technology，DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. (7)25 Languages,No IP Limited,Cover Range to 2025 car models, (8)12 in 1 Live Data Display,Support Blue tooth(BT) Connection&WI-FI Connection etc, (9)2 Years Fr.ee Update, 5 Years B.ackup,(10)Supports USB cable data transfer: Increased data transfer efficiency and convenience.>>>>2 Years Fr-ee Update:The product comes with two years of fr.ee updates for each customer. When the two years of fr.ee updates expire, you don't have to worry about not being able to use the 3s+ V5.0 Scanner, the previous version will still work, just not the latest version. So if you don't want to renew the update, you can use the previous version for your car diagnostics，work out of box!

Topology Mapping, boosting your work efficiency to unprecedented levels

One-Click Diagnostics for All Car Systems: A Game-Changer that Boosts Work Efficiency

Compared with other high-end scanners in the market, the X431 PRO3+ V5.0 diagnostic scanner with topology map function car diagnose all the systems of the vehicles in seconds, and all the healthy and unhealthy data in the car's system will be displayed, pinpointing the car's faults, greatly improves work efficiency and saves time. Other scanners, such as the X431 PRO V 5.0, X431 PRO Elite, etc, need to detect and diagnose one system by one, which can't locate the automobile faults comprehensively and accurately, and reduce the working efficiency greatly. LAUNCH X431 PRO3S+ V5.0 for repair shops, engineers, Diyers is an great investment!

• Introducing the revolutionary function of topology mapping in automotive diagnostic products! Say goodbye to guesswork and hello to precision with our advanced technology that allows you to easily identify and locate faults in your vehicle's electrical system. With topology mapping, you can quickly and accurately diagnose issues, saving you time and money on costly repairs.
• Our cutting-edge diagnostic tools provide a comprehensive view of your vehicle's electrical system, giving you a detailed map of all the components and their connections. This allows you to quickly pinpoint any faults and troubleshoot with ease. Whether you're a professional mechanic or a DIY enthusiast, our topology mapping feature is a game-changer that will take your diagnostic capabilities to the next level.
• Don't settle for outdated diagnostic tools that leave you guessing. Upgrade to our topology mapping technology and experience the future of automotive diagnostics today. With our products, you'll have the power to diagnose and fix problems with confidence, ensuring your vehicle runs smoothly and efficiently. Try it now and see the difference for yourself!
• Topology Mapping Functions with 12-in-1 Live Data Stream : You can use Launch X431 PRO3 V+ 5.0 escaner automotriz professional to view and capture real-time Live Data, get to know the current operating status for parameters, and provide insight into overall vehicle performance. There are three display modes available for data viewing: Graph, Value, and Combine. And you can display 12 data streams at the same time, providing great convenience for comparing data.

As a universal scan tool, the Launch scanner X431 Pro3S+ V5.0 automotive obd2 scanner can diagnose all systems on 99% of vehicles on the road and does so to OE levels. Rather than using separate OE diagnostic tools, the Launch scanner X431 Pro3S+ V5.0 helps you increase efficiency and control costs. The systems include but are not limited to:

• PCM (Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Gear, and more…
• Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS, and more…
• BCM (Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head-up Display, Wipe Control System, Roof, Seat & Door Motor system, ABS ESP system, Air Condition. Electric Windows, and more…
• Electrical System: Centralized Control System Chassis Integrated Control and Safety System, Intelligent Body Electronic System, Communication and Information/Entertainment System.

ECU Information Retrieval: Access control unit details like unit type, version numbers, and more, offering crucial references for repair work.

Read/ Clear DTCs: Read fault codes to locate problems and clear the codes after certain repairs.

8-in-1 Live Data Stream Insights: Visualize sensor data through Live Data streams and graphs, recording and replaying data stream, including common values like Transmission Temperature and Misfire.

Freeze Frame Analysis: Capture a snapshot of current sensor values during issues like engine misfires, aiding in diagnostics.

DTC Help & Repair Tips ,Compared to ONLY providing simple DTC definition of other scanner ,LAUNCH X431 Pro3s+ V5.0 Scanner provides comprehensive repair support by offering detailed explanations, probable causes, and troubleshooting guidance for each Diagnostic Trouble Code (DTC) that is generated during a scan. This additional information assists you in identifying the root causes of issues and allows for more accurate and efficient diagnosis.

Introducing the 2025 Apex Professional Automotive Bidirectional Scanner: The Next-Gen Upgrade to the X431 PRO3s+ V2.0. Designed for Every Technician

ECU Coding, or Electronic Control Unit Coding, involves coding or updating the software within a vehicle’s ECUs (Electronic Control Units). These units control various systems in the vehicle, from engine performance to safety features. ECU coding allows technicians to modify settings, update firmware, and ensure optimal vehicle operation.The ECU coding function is used to reflash the vehicle control module, which allows you to coding the adaptive data of certain components after a repair or replacement has been performed, providing a method section for driveability, fuel efficiency, power loss, fault codes, and mechanical durability issues.>>>Thanks to the LAUNCH X431 Pro3s+ V5.0 Elite Scan tool, you can get more repair orders and Improve your efficiency and professionalism , Having such a state-of-the-art ,Fast,Smart, Intelligent Bi-Directional Scanner, Which is a great investment in your life .

1. Code Adaptive Data/ECU Replacement: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. LAUNCH X431 PRO3s+ V 5.0 escaner automotriz professional has the ECU coding function to recognize new actuators after you change the fault actuators or parts.
2. Recognize Replaced Modules: ECU coding enables multiple car systems to recognize each other and then the actuators can start to work.
3. Flash Hidden Functions: This feature is used to activate hidden features that most car manufacturers include that are not available to the average car owner. Examples include corrective consumption calculation, seat belt warning, auto start/stop, hidden menus, daytime running lights, cruise control, comfort windshield washer, welcome lights, etc. To enable most of these functions, it is enough to activate them (in the car's "brain"), while for some others it is necessary to install additional missing modules in the car.
4. Advanced Customization: ECU coding goes beyond just enabling hidden features. You can delve deeper and adjust numerous parameters to personalize your vehicle’s behavior and performance according to your preferences
5. Recode Module Installation : LAUNCH X431 PRO3S+ V5.0 apex Support PMI function, fit for Ford /fit for Lincoin/fit for Mazda etc.This function is used when you need to replace a module (replace ECU) or initialize a module.No need using the J2534 or buying a subscription.

Examples of ECU Coding:

• Fit for new Ford Focus can be upgraded to a tire pressure monitoring function by flushing the ECU. This feature is especially important for those who like to drive long distances, significantly improving the safety of the car;
• Fit for Mercedes-Benz E-Series can change the much-criticized air conditioning mode by brushing the ECU to improve passenger comfort;
• Fit for VW Passat can be swiped to "modify home/leave time";
• It is important to note that, due to hardware and other reasons, if you want to brush the "home/away function", you must have the automatic headlights function.

ECU Coding Compatibility:

• Online Coding: Fit for BMW, Fit for VW, Fit for Audi, Fit for Skoda, Fit for SEAT, Fit for Porsche, etc.
• Offline coding (Variant Coding): Fit for BENZ, Fit for Ford, Fit for Mazda, Fit for Vauxhall, Fit for Opel, etc.
• Flash Hidden Functions: Fit for Benz, Fit for BMW, Fit for VW, Fit for Audi, Fit for Skoda, Fit for SEAT, Fit for Porsche, Fit for Jeep, Fit for Dodge, Fit for Chrysler, Fit for Toyota, Fit for Honda, etc.

Equipped with 55+ Essential OEM Maintenance Functions for Professional Repairs

The LAUNCH X431 PRO3S+ V5.0 offers a range of essential service functions that allow you to quickly access vehicle systems for routine maintenance and repair tasks.The number of functions can vary and may exceed 200 depending on the vehicle’s make, model, and year

1.OIL RESET – Reset the oil life systems every time the oil and oil filter are changed; 2. FUEL INJECTOR CODING– Code new injector numbers to replace the previous one when fitting the new injectors or after the replacement is completed; 3.BRAKE RESET – Deactivate and activate the brake control system, assist with brake fluid control, open and close brake pads, etc.; 4.SAS RESET – Perform steering angle sensor calibration and clear records; 5.BAT.RESET – Evaluate the battery charge state, monitor the closed-circuit current, register the battery replacement, etc.; 6.ABS BLEEDING– When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity; 7.ELEC.THROTTLE RLRN – Initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state; 8.TPMS RESET – Tire pressure resetting is required to be performed after maintenance is performed; 10.D.P.F REG – Clear PM (Particulate Matter) from the D.P.F filter through continuous combustion oxidation mode to stabilize the filter performance; 11.GEAR(Crank Position Sensor Adaptive) LEARN – Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced. (Available in the system menu and permanently available.Depending on the specific car models, not for all cars, ). and more and more function will be improved and optimized. 12.EPB RESET 13.AFS HEADLAMP RESET 14.SUNROOF INITIALIZATION 15.SUSPENSION RESET 16.GEARBOX RESET – Help complete the gearbox self-learning to improve gear shifting quality. 17.TIRE RESET 18.A/F RESET 19.ADBLUE RESET(Diesel Engine Exhaust Gas Filter) 20.COOLANT BLEEDING 21.NOX SENSOR RESET 22.STOP/START RESET 23.SEAT CALIBRATION 24.TRANSPORT MODE 25.WINDOWS CALIBRATION. 26.AC SYSTEM RELEARN/INITIALIZATION 27.E.G.R RESET 28.RESET FUEL ALCOHOL LEVEL 29.RESET FUEL TRIM 30.HIGH VOLTAGE BATTERY DIAGNOSTICS 31.GPF REGENERATION 32.LANGUAGE CHANGE 33. ACTIVATE FUEL PUMP 34.DISPLAY OF SCN 35. INJECTOR INJECTION QUANTILY ADJUSTMENT. 36.VARIANT CODING 37.LEVEL CALIBRATION 38.Camshaft/Crankshaft Sensor Relearn 39.Fuel Economy Test 40.Reset Fuel Alcohol Level 41. Interactive Vehicle Dynamics (IVD) Initialization Sequence 42.Halt/Resume Transmission Adaptive Learning 44.SWS Initialization 45.VIN Registration(Write) 46.Normalise Slide/ Tilt Sunroof 47.Activate refuel detection 48.HFM,throttle valve,cooler bypass 49.Idle adjustment 50.Initialisation of rain-light-solar-condensations sensor 52.Replacement partuculate filter 53.CBS Reset UDS 54. Change vehicle system language.ect

1. Keep Growing with UPDATES !! (depending on the specific car models, not for all cars, ). and more and more functions will be improved and optimized.

2. LAUNCH scan tool X431 PRO3S+ 5.0 developed 200+ functions for specific models. C-ompared with other diagnostic scanners that can only do the Reset functions, the bi-directional scanner can finish deeper and wider Reset, Regeneration, Initiation, Matching, Calibration, Re-placement, etc.

200+ Car Brands; 200000+ Cars supported from 1986-2025

Auto Vin:Auto VIN (Automatic Vehicle Identification Number) function in an automotive diagnostic tool automatically detects and reads the vehicle's VIN from its electronic control units (ECUs),which identifies specific information about the vehicle, such as its make, model, year, and manufacturing details. This feature streamlines the diagnostic process by eliminating the need for manual VIN entry

VAG Guide Function: VAG Guide function in an automotive diagnostic tool provides detailed, step-by-step guidance specifically for vehicles manufactured that fit for the Volkswagen Group (Fit for Volkswagen,Fit for Audi,Fit for Seat,Fit for Skoda, and Fit for Porsche). This feature offers comprehensive information on diagnostics, repairs, and maintenance procedures tailored to these brands

Cloud Health Report: The Cloud Health Report feature in an automotive diagnostic tool leverages cloud computing to provide a comprehensive, real-time analysis of a vehicle's health. This function collects and processes data from various electronic control units (ECUs) and sensors within the vehicle, then uploads it to a secure cloud server for detailed evaluation. The resulting report offers insights into the vehicle’s overall condition, helping technicians identify potential issues before they become serious problems

AutoAuth for FCA SGW: Fit for Fiat; fit for Chrysler Automobiles (FCA) implemented a secure gateway module that was introduced on a selection of their 2018 and newer model vehicles. Access to diagnostic functions requires registration and authentication through AUTOAUTH for scan tools. You can directly log AUTOAUTH account on X431 PRO3S V5.0 bidirectional scan tool and process diagnostics for FCA vehicles seamlessly.

D-DPU Protocol：Cost-effective solution Vectors D-PDU API is a cost-effective solution especially for OEMs and suppliers who already use the Vector network interfaces and who are additionally use or develop ISO 22900-2-based applications. Therefore, the Vector bus interfaces can also be used for customer-specific diag nostic and flash applications. An additional VCI hardware is no longer required.

CANFD Protocol：CAN with flexible data rate (CAN FD) overcomes the limitations of the classical CAN bus in terms of data transfer rate. With advanced CRC algorithm and much wider compatibility, it will accommodate more data, run faster, improve communication speed, reduce the risk of missed. Fit for GM Vehicles from 2020-2025 including Fit for Onix/ Fit for Tracker/ Fit for Cavalier/ Fit for Encore/ Fit for Suburban/ Fit for Escalade/ Fit for Tahoe/ Fit for Yukon/ Fit for Grand Cherokee/ Fit for Montana/ Fit for Silverado/ Fit for Sierra/... keeps growing

DOIP Protocol：(Need Purchase extra DOIP Connector): DOIP diagnostic function enables the use of diagnostics introduced via UDS on TCP/IP and Ethernet. This allows the LAUNCH X431 Pro3S+ V5.0 to save time and money when performing complex diagnostic tasks and flash memory app

View History: Once a vehicle diagnosis is performed, LAUNCH X431 PRO3S V5.0 will record the every detail of the diagnostic process.you can record/review/playback live data anytime .The History function provides quick access to the tested vehicles and users can resume from the last operation, without the necessity of starting from scratch

Remote Diagnosis: Configures LAUNCH X431 PRO3S+ V5.0 as an I/M(Instant Messaging) tool, which enables technicians to exchange repair experience and perform remote assistance more conveniently.

Online Feedback(message;phone call;facebook): LAUNCH x431 Pro3s+ V5.0 scanner provides you with a feedback function to share any problems you encounter in the process of diagnosis. We will make every effort to perform a no-delay problem solving and makes improvements on product quality according to your problems and suggestions, thus offering you a higher quality user experience

Maintenance Help: Including How-to Videos, operation skills, and user manual, Q&A, Quick start guide, etc.

Online Repair Accademy , mainly including:Operating skills,DTC Help,Automotive Technology handbook, circuit diagrams of certain modules of some models, component introduction, fastener tightening specifications;Repair Case, repair cases of some car models.

5 Years Back Up :products come with a five-year w-arran-ty policy. From the date of purchase, we are responsible for the after-sales of your product within five years. 2 Years Fr-ee Update:The product comes with two years of fr.ee updates for each customer. When the two years of fr.ee updates expire, you don't have to worry about not being able to use the 3S+ V5.0 Scanner, the previous version will still work, just not the latest version.

1. X431 VSP-600 Videoscope (For inspection of hidden and narrow parts of the engine, fuel tank, brake system, etc.)

2. X431 TSGUN: (You can use it not only to activate the sensor ID, tire pressure, sensor frequency, tire temperature and battery status; you can also code sensor data to a blank LAUNCH branded sensor in three ways: automatically, manually and by activating a copy; at the same time, you can write the newly coded sensor ID to the vehicle ECU.)

3. X431 SmartLink HD Module -LAUNCH smartlink HDIII add-on module is an essential truck module which can turn your X431 scan tools into full function heavy duty truck diagnostic tools,working on both heavy-duty(Class 4 through 8) and medium-duty trucks(Such as heavy trucks, city buses, bulldozers, excavators, etc.)

4. X431 ADAS Mobile/ADAS PRO -Compatible with LAUNCH X431 ADAS Mobile to calibrate advanced driver-assistance systems, such as ACC, AEB, and more. ADAS Calibrate a wide range of camera-based & radar-based driver assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system. ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.

5. X431 Printer (Print out diagnostic data/ reports.)

6.X431 BST360 battery test.(For Battery Cranking system Test, Battery Charging system Test, Battery Health Test) Allows you to fix battery detection faster and easier. For battery cranking system test, battery charging system test, battery health test

7.X431 S2-2 Sensorbox：Diagnose and simulator vehicle sensor faults quickly and conveniently.

8.X431 O2-2 Oscilloscope: This module can make the auto repair technician quickly judge the faults on automotive electronic equipment and wiring. Measure and test all the electrical, electronic components and circuits.

9.X431 Multimeter：Allows you to measure the physical parameters such as voltage, resistance, frequency etc.

10.Electric Vehicle Diagnose（New Energy）: This function only applies to the new energy vehicles. There are two function modules available: Vehicle diagnosis and battery pack detection. Note: This function needs to work with New Energy Vehicle Diagnosis Add on Kit (optional).

11.LAUNCH X431 SmartlinkC HD module: This function enables X431 PRO3S+ V5.0 can diagnose HD truck from 12V to 24V.

Supports over 200,000 vehicle models | Includes CAN FD protocol support | Features FCA gateway bypass | No IP restrictions

Full OBDI&OBDII Connectors and cables ,cover all vehicles in the world:LAUNCH X431 PRO3S plus V5.0 supports full OBD1 and OBD2 protocol which be shipped as complete package with necessary connectors and accessories. Some vehicle-specific OBD1 adapters are included.

AutoAuth for FCA SGW: Fit for Fiat; fit for Chrysler Automobiles (FCA) implemented a secure gateway module that was introduced on a selection of their 2018 and newer model vehicles. Access to diagnostic functions requires registration and authentication through AUTOAUTH for scan tools. You can directly log AUTOAUTH account on X431 PRO3S V5.0 bidirectional scan tool and process diagnostics for FCA vehicles seamlessly.

CANFD Protocol：CAN with flexible data rate (CAN FD) overcomes the limitations of the classical CAN bus in terms of data transfer rate. With advanced CRC algorithm and much wider compatibility, it will accommodate more data, run faster, improve communication speed, reduce the risk of missed. Fit for GM Vehicles from 2020-2025 including Fit for Onix/ Fit for Tracker/ Fit for Cavalier/ Fit for Encore/ Fit for Suburban/ Fit for Escalade/ Fit for Tahoe/ Fit for Yukon/ Fit for Grand Cherokee/ Fit for Montana/ Fit for Silverado/ Fit for Sierra/... keeps growing

• USA: Fit for Gm (Fit for GM/Fit for Chevy/Fit for Cadillac/Fit for Buick),Fit for USAFord,Fit for Chrysler (Fit for Chrysler/Fit for Dodge/Fit for Jeep), Fit for Willy; Australia: Fit for Austford, Fit for Holden; Brazil: Fit for BXFiat, Fit for BXGM
• Europe: Fit for Vaz,Fit for Porsche, Fit forMaserati, Fit for BMW,Fit for Seat,Fit for VW, Fit for Audi, Fit for Citroen,Fit for Landrover, Fit for Smart, Fit for Renault, Fit for Skoda, Fit for Sprinter, Fit for Land Rover, Fit for Benz, Fit for Fiat, Fit for Opel, Fit for Volvo,Fit for Peugeot, Fit for Ferrari, Fit for Saab, Fit for Gaz,Fit for DR,Fit for Maxus,Fit for Iveco
• Aisa: Fit for (JAPAN) Toyota, Fit for Daihatsu, Fit for Honda, Fit forInfiniti,Fit for Isuzu, Fit for Jpisuzu,Fit for Lexus, Fit for Mazda, Fit for Mitsubishi, Fit for Nissan, Fit for Nissan GTR,Fit for Scion, Fit for Subaru,Fit for Suzuki, Fit for Tlisuzu, Fit for Toyota; (KOREA) Fit for Daewoo, Fit for Hyundai, Fit for KIA, Fit for Samsung, Fit for Ssangyong

What Comes with LAUNCH X431 LAUNCH PRO3S+ V5.0 automotive obd2 scanner?

12 Connectors & 4 Cables（OBD1 adapters): Fit for BENZ-14, Fit for BENZ-38,Fit for BMW-20,Fit for CHRYSLER-6, Fit for FORD-6+1, Fit for NISSA-14+16 ,Fit for GM/VAZ-12,Fit for HONDA-3 ,Fit for KIA-20 ,Fit for MI TSUBISHI/Fit for HYUNDAI-12+16 ,Fit for TOYOTA-22,Fit for TOYOTA-17; Cables:HDB15F to HDB15F data cable,Type-A to Type-C USB cable,Cigarette lighter cable,Battery clamps cable

Note： Other 10" automotive high-end scanners don't have OBD1 connectors,like the t0pd0n scanner.